What are the components of the DC motor, the main components and functions of the DC motor？

Each mouth-flow motor contains two separate terminals, there is a magnetization center between them, and there are two main points, the stator and the rotor, the stator contains the brushes used to sign the motor, the magnet housing and other components, the rotor contains the gun, Then the transmitter and the output method, when the absolute voltage produces the moving motor, these two parts work together.

The DC motor has two directions of work. The current motor that generates electricity by consuming the machine cell is the generator, and the DC motor motor that consumes the power of the machine to generate the core of the machine. The same DC motor can be motorized into 2 motors.

The basic components of a DC motor

The DC motor uses or produces the machine, which realizes this by converting the mechanical cell into electricity, and vice versa, the direct charging machine is composed of two basic parts, one is stationary and the other is moving, which is called magnetic field deduction Area, an important example of a DC motor is the number between two magnets on its own shaft, a practical DC motor also requires commutators, brushes, magnetic stages and bearings

1. Fine gauge group of DC motors

The magnetic field is the special stop of the direct motor, and the magnetic field oil is often composed of molten grades. In the above example, that is, the line shines between the two magnets and turns their contacts, and the two magnets generate a magnetic field, a conductor, and an electric grid, which must move in it to generate electric charge.

The function of the magnetic field shape is to generate a uniform service field, so that the electricity can be transferred in the equipment. 2 Electric phase testing group

The potential is the moving part of the current, it moves in the current burning, and completes the electrical system of the charger. 3. commutator

Electricity and its use will generate an alternating electric field (EMF), which will destroy the operation of the flow motor. The commutator and the commutation strand solve the AC EMF well and prevent the brushes from generating sparks.

It is a kind of mechanical charging, which can convert the AC voltage generated in the electric loose winding into the current voltage of the oil used for electricity. . 4.5008

Each part of the DC motor has its own work, as a changer, made of a half-country ring. It converts the current into ice flow, and it also makes the circuit contact with the external power supply or battery. Here, we also provide a illuminator that promotes the rotor in the magnetic field to use electric energy or energy storage type, it is only Generated when the motor is used as a generator.

5. system in a DC motor

The brush receives electric charge from the armature, which must be supported by the armature of the DC motor, which must be supported by the armature and the auxiliary armature, which allows smooth and constant movement when there are fewer frictions. Expired connection system converter and external load circuit.

It uses less spark and provides better connection.

The 0 phase of the brush is the electrical connection between the internal customer and the negative number telecommunications outside the Siding.

If the pressure of the brush is very high, the friction will cause the brush to heat up. On the other hand, if it is too high, the amine of the commutator and the commutator may cause sparks. Over-report the number of brushes of the machine is the same as the number of poles, for example, A 4-level machine has 4 brushes. When we unify the commutator, the connected electrical appliances have positive and negative feedback. Tick ​​and e-mail