How to Replace a Range Hood Fan Motor

Whether you have an open wall or a cabinet-mounted range hood, your kitchen can benefit from the ventilation of a range hood fan motor. The fan is essential in removing grease and steam from the cooking area, and it also improves air quality by venting smoke, soot, and other odors.

Purchasing a new range hood is a major investment, so you want to choose a reputable brand and one that is built well. Look for a brand with a reputation for durability and a high-quality customer service department.

A range hood is an essential appliance in any kitchen, and it's important to buy the right one for your needs. If your current range hood is making loud noises, has a broken fan, or doesn't adequately vent the area, it might be time to replace it with a new model.

The best range hoods feature powerful blowers that can easily remove thick fumes and odors. These are available in a variety of sizes, shapes, and designs.

If your current range hood isn't performing as expected, consider installing a new model with a better fan motor. You can purchase a replacement motor online or at a home appliance store.

Before completing the installation of your range hood, check with local building codes and homeowner's associations to ensure you don't have any restrictions. In some locations, installing a range hood is considered an improvement and does not require a permit.

You can remove the existing hood and install a new one by following these steps:

1. Locate the fan motor in the hood, using your handy hand tool. Identify the fasteners holding the fan motor in place. Use your tool to unthread these fasteners, and then pull the fan motor out of the hood.

2. Examine the fan blade and motor for signs of damage or wear and tear. If the fan blade is rusted or has significant cracks, it will no longer turn at full speed when activated.

3. Test the motor and fan for proper functioning by turning it on and off repeatedly. If it makes loud noises when you start and stop it, or doesn't work as intended, replace the motor.

4. Check for electrical issues with the hood’s wiring. If you notice any wires that are loose or damaged, reconnect them and repair any damage.

5. Test the electrical control board of the hood to make sure it’s working properly. If it’s not, recheck the wiring connections between the control and the fan motor.

6. Check the electronic control board for burn marks that indicate a problem with the circuit board.

If you notice burn marks on the control board, it means the board has failed and will need to be replaced.

7. If the lights on your range hood aren’t working, it may be because they aren’t sending signals to the electronic control board. If they do, you can check for continuity through the light sockets with the hood unplugged to make sure there isn’t a problem in the light bulb sockets or a switch.

EXHAUST TABLE FAN MOTOR